Setup guide
64
www.SecurityCamerasDirect.com
SECTION 8: DVR SYSTEM MENUS REFERENCE
NOTE
When you select the ALARM option, it is necessary to set the motion detection sensitivity and area. Please refer to Motion Detect
on page <?>,for details. Congure the alarm triggering settings before selecting alarm recording.
To restore to default settings, scroll to the “back” button in the lower right corner of the window, then press ENTER.
To save the new settings, scroll to the “check” button in the lower right corner of the window, then press ENTER.
8.4 Video
Move the cursor to VIDEO (the icon will be highlighted when selected), then press ENTER to enter the video menu. You can use the
direction keys and cursor to change the options.
8.4.1 Video Channel
Select the channel to setup.
8.4.2 Name
You can assign a name to each channel. The channel name can be up to 9 characters in length.
8.4.3 Position
You can set the position where the channel name appears in the view window. Press ENTER to switch from U-L, D-L, U-R, D-R and
OFF.