Setup guide
54
www.SecurityCamerasDirect.com
SECTION 8: DVR SYSTEM MENUS REFERENCE
Hide Advance: Close the Advance tool bar.
PIP 1x1: This feature displays a small picture in a full screen.
PIP 1x2: This feature displays two small pictures in a full screen.
VGA/BNC Switch: Click to switch the video output of the DVR from VGA to BNC or BNC to VGA.
8.1.2 Menu options
To modify/adjust system conguration, click the System Settings icon on the Tool Menu.
Clicking the System Settings icon opens a window with 6 tabs: System, Record, Video, Network, Alarm, and PTZ. These tabs provide
general system settings for operating your DVR.
Open Drop-down List or Switch Value
Save Button
Titles of the menu list items are located on the left, and the corresponding changeable or non-changeable values are represented in
the elds to the right. You can:
• Select the values from the list (toggling the preset data by pressing the arrows on the side of the eld);
• Select the values from the drop-down list (open the drop-down list by clicking the down arrows on the side of the eld);
• Input the required data after entering a customized window by pressing the [>>] button in some of the elds;
• Familiarize yourself with the existing non-changeable settings.
When entering data into the elds using the remote control directional keys or the DVR front panel, and when positioning the
mouse over them, a short description of the setting will appear at the bottom of the window.