Setup guide
36
www.SecurityCamerasDirect.com
SECTION 5: NETWORKING YOUR DVR
In the Internet Options window, click Apply, then click OK to close the window.
NOTE
If your computer operating system is Windows Vista or Windows 7, User Account Control can interfere with the normal operation
of the DVR user interface. To disable UAC, open the Control Panel > User Account > User Account window, clear the Use User
Account Control (UAC) to help protect your computer check box, then click OK. A computer restart may be required.
4. In the IE URL eld, enter the IP address assigned to your DVR with the WEB PORT number congured in your DVR (in the
example above, the default WEB PORT is 8090). Using the example shown above, enter:
192.168.1.100:8090
NOTE
After sending the URL, IE may prompt you to load the Chinese Simplied language pack. You can click Install or Cancel. If you click
Cancel, the message will reappear again when you logout and login.
5. During the rst connection to an ECO4 series DVR, a security warning to install software appears. Click Install and follow the
on-screen instructions to complete the installation.