Setup guide
26
www.SecurityCamerasDirect.com
SECTION 4: DVR SETUP
5. Click the >> icon on the MD AREA line to specify the areas where of the screen where motion should be sensed. Dening
only these areas (and ignoring other areas) of the eld of view improves the performance of the DVR.
The Motion Detection setup screen is partitioned into a grid of 10 x 15 blocks. Motion sensing in each block can be toggled
on and o by clicking the block area. Initially, all blocks are shaded purple, indicating that motion sensing is disabled
everywhere.
To enable blocks (areas) for motion sensing, click the block, or use the mouse to drag a rectangle over areas you want to
enable. The shading will disappear for areas selected for motion detection. To disable an area selected, click on it.
Motion Sensing
Disabled
Motion Sensing
Enabled
6. After the motion sensing areas are selected (unshaded), right click to return to the MOTION DETECTION SETUP menu.
7. Check the box to right of the RECORD label to enable recording when motion is detected.
8. Check the box to right of the BUZZER label to sound the buzzer when motion is detected.
9. Check the box to right of the PRERECORD label to add the previous 5 seconds of video from the camera to the motion
detection recording.