Setup guide
18
www.SecurityCamerasDirect.com
SECTION 4: DVR SETUP
18
— Overwrite: Recordings on the HDD are overwritten when the HDD becomes full. The oldest recording is overwritten
rst.
— 1 HOUR .. 90 DAYS: Recordings are overwritten when older than the time selected.
3. Click the conrm icon (a) in the lower right corner of the screen, then click the Conrm button in the Note window.
4. Press the MENU button on the front panel or click on the desktop to return to the SYSTEM tab.
4.3 Record conguration settings
The recording settings of each camera channel can be specied separately or collectively. These settings, including the recording
schedule for each channel, are setup through the Record tab.
1. Click the Settings icon on the Tool Bar to open the SYSTEM tab window.
2. Click RECORD to open the RECORD settings menu.
3. Click the q icon at the right end of the CHANNEL line. From the dropdown list, select the number of the camera channel
you want to setup, or select ALL to congure all channels with the same settings.
4. Click the q icon at the right end of the RECORD line. From the dropdown list, select DISABLE, or ENABLE to record video
from the channel.
5. Click the q icon at the right end of the BITRATE line. Select GOOD, NORMAL, or LOW. A GOOD bitrate produces the best
recording quality, but uses more processing power and hard disk space.
6. Click the q icon at the right end of the RESOLUTION line. From the dropdown list, select D1 (720 × 486), HD1 (720 ×
240), or CIF (352 × 288).