ASSEMBLY INSTRUCTION RATTAN SOFA SET WF190311AAD; WF190311AAE
C K B J B E F D A A L H G G I Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5.
Part List & Hardware B A C E D F Bench Back Frame (1pc) Seat Frame (2pcs) G Table Side (1pcs) Table Feet (2pcs) J K Seat Cushion (2pcs) Table Bracing (1pcs) L Bench Cushion (1 pc) 2 Bolt M6x40mm (20 pcs) Bench Seat Frame (1pc) I H 1 Back Frame (2 pcs) Left Frame (3pcs) Right Frame (3pcs) 3 Bolt M6x30mm (10 pcs) Table Glass (1pc) 4 Bolt M6x15mm (8 pcs) Allen key(1pc)
STEP 1 STEP 2 Connect Back Frame (C) & Seat Frame (D) with Connect part from STEP 1 & Right Frame (A) with Bolt (1) Bolt (1) & (2) C 1 D 1 2 1 A STEP 3 STEP 4 Connect part from STEP 2 & Left Frame (B) with Bolt (1) & (2) Put on Seat Cushion (J) to complete chair B 1 J 1 2
STEP 5 STEP 6 Connect Bench Back Frame (E) & Bench Seat Connect part from STEP 5 & Right Frame (A) with Frame (F) with Bolt (1) Bolt (1) & (2) E 1 F 1 1 1 2 A STEP 7 STEP 8 Connect part from STEP 6 & Left Frame (B) with Bolt (1) & (2) Put on Bench Cushion (K) to complete chair B 1 K 1 2
STEP 9 STEP 10 Connect 2pcs Table Feet (G) & Table Bracing (I) with Bolt (1) Connect part from STEP 9 & Table Side (G) with Bolt (1) & (2) 3 2 3 3 2 3 3 I H 3 2 G G STEP 11 Put on Table Glass (L) to complete table L FINISH
