Instructions / Assembly

CONVERTING TO A DIFFERENT GAS TYPE (MATCH LIT)

To convert MATCH LIT MANUAL UNITS (only) from propane to natural gas or from natural to propane gas, carefully

follow the steps below:

1. SHUT OFF THE GAS SUPPLY TO THE UNIT AND ANY NEARBY ELECTRICAL SOURCES OR APPLIANCES.

2. If present, remove all decorative media from the unit.

3. Remove the screws attaching the burner pan to your enclosure.

4. Carefully detach the flex connector attached to the orifice holder (see Fig. 3) and unscrew the orifice holder

from the burner pipe (see Fig. 4).

5. Remove the orifice from the holder (see Fig. 4) and replace with the proper-sized one for your gas requirement.

Propane gas requires a 2.30 mm (drill size) orifice. Natural gas require a 3.78mm orifice.

Note: If you are converting to and using natural gas you MUST install the air shutter over burner pipe to cover the

air holes (see Fig. 4). For propane (L.P.) gas, remove the air shutter.

Replace the orifice holder and reattach the connector from the valve (see Fig. 3).

The regulator must now be converted to the new gas type.

6. To convert the regulator from propane gas to natural gas.

The appliance must be isolated from the gas supply piping system by closing , It's individual manual shout off valva

suring any pressure testing of the gas supply piping system. At test pressure equal to or less than 1/2 psi(3.5 KPA).

7. Move the propane pipe from regulator (see Fig. 5) and replace with 3/8" natural gas pipe (see Fig. 12-6, natural

gas pipe package not included).

8. Restore your gas supply and check for leaks per the INSTALLATION section. When no leaks are detected,

fasten the burner pan back into place on the enclosure and replace the decorative media.

Fig.4

Connector from valve attached to orifice

holder on burner pipe

Detach connector from orifice holder

when changing orifice to a different gas

type

Fig.5

Remove propane pipe.

Fig.6

Install gas pipe

ORIFICE

(Remove to change to a different gas type)

Fig.4

Burner 2.30 mm-propane gas

pipe 3.78mm-natural gas

Air shutter (Used only with

natural gas. Removed for

Propane gas.)