Instructions / Assembly

TABLE ASSEMBLY INSTRUCTIONS . DIRECT WICKER
TABLE
ASSEMBLY INSTRUCTIONS
BEFORE YOU START ASSEMBLING YOUR
FURNITURE:
CHECK THAT YOU HAVE ALL THE
PIECES LISTED ON THE LEFT HAND
SIDE.
LAY A CLEAN SHEET ON A FLAT
SURFACE BIG ENOUGH TO ASSEMBLE
YOUR FURNITURE ON IN ORDER TO
PROTECT YOUR FURNITURE.
A
1
B
1
C
2
D
1
E
12
F
1
1.
Lay the tabletop (A)down sothe frame faces upwards.With the slit facing
upwards,attachchair legs (B),tothetable top by aligningthe screw holes
with those in thetable top(A).Insert screws(E) throughthewasher and into
thescrewholesandlooselytightenwiththeallenkey(F).
Theninserttablelegs(C)intopositionovertheslitsoftableleg(B)andalign
thescrewholeswiththeholesinthetabletop(A).Insertscrews(E)through
thewasherandintotheholesandlooselytightenwiththeallenkey(F)inthe
locationsshownin theimagebelow.
Fully tighten all of the screws using the allen key (F).
2.
Place the screw caps over all of the screws.