Instructions / Assembly

6
1
Notice:
1.50% Tighten before fixing all screws, allen wrench is recommended
instead of an electric drill,
2.Place the item on a flat ground to adjust and make sure it remains stable,
3.Tighten up all screws with tools gradually,
4.If the screws are not aligned with holes during assembly, please loosen
all the other screws to 50% and continue the assembly process,
5.If the item is not stable, please loosen all the screw, adjust it on a flat
ground and tighten up all screws again,
6.Note: If one or some screws are fully tightened during assembly, chances
are the others will not be aligned with holes. In addtion all the holes are
designed to be relatively larger to provide more space for the adjustment of
the screws.
E
E
F
F
H