User`s guide

NETWORK IP CAMERA User’s Guide
59
E. Updating Network IP Camera’s newly upgraded Program
Download a newly upgraded firmware
You can download the newly upgraded Firmware software through the Internet at the web site
(http://www.intellinet-netwok.com)
Identify the version of Firmware
You can identify the version of Network IP Camera’s Firmware on System Configuration Page. (But,
the version of firmware is required 0030078 or higher)
(You may check the version of your Network IP Camera firmware first and then try to update)
To check the present version of Firmware, follow the below step.
① Connect to your Network IP Camera’s homepage.
② Click “Administrator Tools”.
③ Move to System Configuration Page and then you can check the version of Firmware.
Upgrading the newly Network IP Camera’s firmware
This updated firmware can be upgraded in Local Area Network as well as remote site.
Follow the below step for upgrading your camera.
① Confirm that Network IP Camera can be connected to your PC.
( As long as you can access Network IP Camera’s Homepage, you can process upgrading)
② Execute the newly updated firmware.
Caution
This process is to update the current firmware that is already installed into your Network IP Camera
with a newly updated Firmware.
If you are to begin the process, follow the instruction as manual. And during the process, do not
give physical shock nor disconnect network and power. Otherwise, your Network IP Camera can be
damaged seriously, which may result inappropriate operation or operation failure.
If you failed to update Firmware or Network IP Camera does not operate properly after updating
process, please contact your dealer nearby in your area.