User`s guide

NETWORK IP CAMERA User’s Guide
43
6.6 Time Configuration
This page is to configure date and time.
(1) Synchronized with NTP server
Network IP Camera Date & Time automatically through NTP (Network Time Protocol)server.
NTP Server is based on Greenwich time. Select NTP server, IP address and Time zone to set the
date and time automatically, then press, “SUBMIT”. It may not work due to the possible network
error; in this case, you can select other NTP server and IP address or you can set the date and time
manually. Once Date & Time configuration is already set, you don’t have to configure again
whenever you connect to Network IP Camera.
(2) Set manually
Enter the Date and Time manually, then click “SUBMIT”.
NOTE
Network IP Camera does NOT support RTC(Real Time Clock), in case you choose “Set
manually” option. Network IP Camera reinstate as default value “2001/01/01 00:00:00”.
To confi
g
ure Date & Time
,
it must be reconfi
g
ured.