User`s guide

NETWORK IP CAMERA User’s Guide
35
⑤ Brightness mode
You may select “Auto” and “Manual”
⑥ Brightness
As a number is higher, image looks brighter. (Possible to input digits from 0 to 255)
⑦ Contrast
As a number is higher, contrast becomes clearer. (Possible to input digits from 0 to 15)
⑧ Hue
As a number is lower, color becomes pink. On the contrary, as a number is higher, color becomes
green.
(Possible to input digit from 0 to 15)
⑨ Saturation
As a number is higher, color becomes deep (Possible to input digits from 0 to 255)
⑩ Sharpness
As a number is higher, color becomes vivid. (Possible to input digits from 0 to 7)
⑪ Exposure Mode
You may select “Auto” and “Manual”
⑫ Exposure
As a number is higher, image becomes brighter.(Possible to input digits from 0 to 255)
⑬ Back Light
When the light is not enough, “Back Light” may help to see the image.
⑭ Further reduce exposure time
To reduce exposure time from 1/20 to 1/100 under heavy light.
SUBMIT
Transfer a current configuration data to Network IP Camera. After transferring data.
Network IP Camera works with changed data
Load Default Values
Set the configuration as default values. (No need to press “SUBMIT”)
6.3 Network Configuration
This page is to define network type and addresses of Network IP Camera. You can configure
Camera’ S IP, DNS server address, Server IP address. Each configuration takes few seconds for
booting after press “Submit”.