User`s guide

NETWORK IP CAMERA User’s Guide
33
Admin, User Configuration To configure user ID & Password
Event Trigger Configuration
To configure event trigger condition, image capture option, trigger
output
Time Configuration To configure date and time
System Configuration
To configure the camera name, location, PTZ and see the system
information.
Home Move to Network IP Camera homepage
Help To learn more about Network IP Camera
To prevent any unauthorized use of Network IP Camera access is strictly restricted to defined users
only. Administrator(s) has exclusive access to the product Administration Tools and can determine the
registration, and access rights for all users.
Enter the default ID and Password, then click “SUMIT”
(Default ID and Password are all “admin”)
6.2 Image Configuration
This page is to focus the camera using the focus Assistant and define image attributes for your
Network IP Camera.
NOTE
Make sure to click “submit” after verifying configuration, and then you can get the right
Configuration as you want, otherwise it won’t be changed at all.
CAUTION
Although, the Administrator’s default username and password (set to “admin” for all)
can be used for logging in to the unit for the first time, it is highly recommended that you
change the this password for your Network IP Camera as soon as possible – since all Network
IP Camera products are shipped with the same ID and Password as default.