User`s guide

NETWORK IP CAMERA User’s Guide

5.2 Replacing the Lens

Because Network IP Camera is designed with a CS-Mount, the lens supplied with your product

can be replaced with any standard C or CS lens, typically used within the surveillance industry.

Follow the instructions below to replace the supplied lens with any C or CS type lens:

1. Unscrew Network IP Camera lens turning the lens in the anti clockwise

2. C-lens only: Attach the new lens to a C-CS Adapter

3. Screw the new lens onto Network IP Camera. If applicable, adjust the iris according to the

prevailing light conditions.

4. Referring to Focusing the Camera under quiescent conditions, on page 29, Adjusting the focus.

5. Reload your Web browser and monitor the results from the product Home Page.

1.0mm max

NOTE

♦ A Good level of focus is normally achievable throughout several planes within the

camera’s focusing spectrum.

♦ Since optimum focusing is dependent upon the camera’s field of view, it is important

to scan the focusing plane from the closest to furthest perspectives before attempting

any fine-tuning