User`s guide

NETWORK IP CAMERA User’s Guide
29
6) Connected Client
This shows the number of client who is connected to Network IP Camera simultaneously. The
number “ /32”represent maximum concurrent user. This number may change according to memory
possession. When you set image capture option on “Event Trigger Configuration” high, this number
may decrease.
7) Frame rate
You may choose image transmission speed. If you choose ‘Fastest”, you can get images at fastest
speed. The transmission speed depends on your network line’s capacity and PC’s performance.
It is useful to limit the data transmission collision.
8) Expansion
You may select the image size from 0.5 to 2. This function may be used when you want to expand
image size on your PC. (But resolution may not be changed at all)
9) PTZ Control button
This button is to be activated when the PTZ devices are connected to Network IP Camera (Refer to
Chapter “ 6.7. System Configuration”)
5 Adjusting the Camera Lens
5.1 Adjusting the Focus
In order for the Focus Assistant to access the full focusing range for your application
environment, you now turn the lens in the clockwise or anti clockwise direction; unless you want
to replace the lens, it should not be unscrewed more than 1.0mm apart from the Fixed Lens
assembly.
*Adjust
the camera focus
while reviewing the
picture quality on your
Web browser.
Lens
1.0mm max