User`s guide

NETWORK IP CAMERA User’s Guide
24
If your PC is connected on a network where firewall is. In this case, you may not view real time
mage properly because video TCP port of Network IP Camera is blocked. Common video TCP
port (A default video TCP port of Network IP Camera is 80
th
port.) is blocked under firewall. If
you are under firewall, you may view real time image through Network IP Camera’s Server Push
Viewer that transmit video through Web TCP port instead of video TCP port.
By clicking on “Behind Firewall” menu, you may directly connect Server Push Viewer when you
access Network IP Camera homepage.
3) Active-X for MS Explorer User
For a Microsoft Explorer User, Active-X
Control program is required. The program
will be installed automatically when a user
accesses to Network IP Camera. For Active-X
installation on your PC, just click ‘Yes’ to the
question if you want to install the program on
pop-up window. If you cannot see images
after installation, you should download and
install it manually.
Active-X installation manually
If Active-X program fails to be installed automatically, you may install it manually.
The manual installation program is to be downloaded by clicking ‘here’ as follows:
Note: If you have any problem when you install ActiveX, click here to download
and install ActiveX manually
Please follow the instruction to install
Active-X manually.
① Click “here”
② When the panel appears, press “open”
if you want to install right away.
③ InstallShield Wizard appears after
finishing download.
④ Check “Repair” then click “Next”