User`s guide

NETWORK IP CAMERA User’s Guide
15
4.2.2 IP Installer
To install an IP address, you should use the IP Installer provided with Network IP Camera.
You can download its program through the web site (http://intellinet-network.com)
4.2.3 Staring a IP Installer
Firstly, install an IP-Installer program on your PC that is connected on the same local network
as Network IP Camera. And click it. You can only setup a Network IP Camera that is connected
on a local network.
①
Execute IP Installer after Network IP
Camera completes its booting (Wait
until the operating LED blinks every
in a second periodically).
② When the IP-installer is executed,
the panel shows every Network IP
Camera connected at the local network.
From the Network IP Camera listed,
select one to assign a new IP address
(Every Network IP Camera has factory
default IP address).
Note the MAC Address found on the
underside label of Network IP Camera.
To choose a Network IP Camera,
click on its list.
③ Enter the Admin’s ID and Password
in the blank (Default Admin’s ID and
Password are all “admin”) to assign
(or change) IP Address for Network IP
Camera and set up.
Note: System required for IP installer; Microsoft Windows9X/NT/2000