User`s guide

NETWORK IP CAMERA User’s Guide
14
4.2 Assigning IP address by using IP installer.
4.2.1 Connecting Network IP Camera to PC
At first, you need to install an IP installation program (IP Installer.exe) on your PC that is
connected on the same local network as Network IP Camera.
1) Connecting with direct cable (Non Crossover UTP cable)
In this case, you have to use a HUB to connect Network IP Camera and a PC to assign IP address or
you should have an Ethernet Cable to connect the Network IP Camera, and a PC that is already
connected with Ethernet Cable.
2) Connecting with Crossover UTP Cable
Use the crossover to directly connect Network IP Camera to a PC. This connection is to be used to
configure Network IP Camera.
*It is highly recommended that you assign IP address to Network IP Camera with crossover
cable.
User PC
Web-View
Ethernet HUB
Direct UTP
Cable
Connect Network IP Camera
to a PC through a HUB
User PC
Web-View
Ethernet HUB
Direct UTP
Cable
Connect Network IP Camera
directly to a PC through LAN
p
orts.
Crossover UTP Cable