Specifications

UserManualofNetworkCamera
42
Appendix2PortMap
Note: The following setting is about TP‐LINK router (TL‐R410), which is maybe distinct from other
router’ ssetting.
1. Firstly,selecttherouter’sWANconnectionType.AsthefollowingFigureshows:

2. Set the “network parameter” of the router as the below figure. The setting includes subnet
maskandgateway .

3. SettheportmapinthevirtualseversofForwarding.Bydefault,camerausesport80,8000,554
and8200.YoucanchangetheseportsvaluewithIEorclientsoftware.
The following figure gives the illustration. One camera’s ports are 80, 8000, 554, 8200 and its IP
addressis 192.168.1.23.The other camera’s portsare81, 8001, 555, 8201 and IP is 192.168.1.24.
Afterwards,enableallorTCPprotocols.Enabletheportmapafterpressingthe‘Save’.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
