Specifications

UserManualofNetworkCamera

Appendix1SADPIntroduction

1. Briefintroduction

SADP (Search Active Devices Protocol) is a kind  of software which can automatically search

network speed dome in LAN. User can modify the IP address, subnet mask and port of the

devicewithoutvisitingIPaddressofthedevice.Additionally,passwordofthesuperuserinthis

devicecanberecoveredasdefault.

SADPsoftwareneedstosupportSADP,sowe shouldinstallWinPcapatfirst,whichisplacedat

thedirectoryofSADPsoftware.



2. Searchactivedevicesonline

After installing WinPcap, double click sadpdlg.exe. The software will start to search active

devicesinLAN,anddevicetype,IPaddress,Portnumber,DeviceSerialNo.,subnetmask,MAC

address,thenumberof channels,maincontrolandencodingversionanddeviceinitiatingtime

areshowedinthelist,asfollowing:



3. Modifydeviceinformation

Selectthedevicethatneedsmodificationinthedevicelist,thenbasicinformationofthedevice

willbedemonstratedintheinformationcolumn ontheright.Click“modify”buttontoactivate

IPaddress,subnetmask,deviceporteditingandpasswordvalidatingbox,asfollows:

Selectthedevicethatneedsmodificationinthedevicelis

t,thenbasicinformationofthedevice

willbedemonstratedintheinformationcolumn ontheright.Click“modify”buttontoactivate

