Specifications

UserManualofNetworkCamera
36

Figure3.1.3SelectingNormalIP
3.2AccessnetworkcamerawithdynamicIP

Figure3.2.1AccessIPCthroughPPPoEDial‐up
This camera supports the PPPoE auto dial‐up function. The camera will get a public IP address by
ADSL dial ‐up after the camera is connected to a Modem; First, access to the  network camera
through local network, select “Configure””Right Click the Device”, “Remote Configuration”, and
finally select “PPPoE Settings” under “Netw
ork Parameters” to fill  in the PPPoE user name and
password and confirm the password. Please restart the network camera after completion of
configuration. Then the network camera can obtain a  dynamic IP from an ISP operationbusiness.
However, the obtained IP address is dynamically assigned via PPPoE, so the IP address always
changesaccompaniedwithmodemrebooting.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
