Specifications
UserManualofNetworkCamera
28
2.1.3WirelessParametersConfiguration
Note:Thissectionisonlyforwirelessnetworkcamerawithmark'‐W'inthemodelnumber.
Before configuring the wireless network camera, please set the wireless router first. For more
details about wireless router configuration, please refer to the wireless router configuration
instructions.
There are two network interface cards in the camera: wired network interface card and wireless
networkinterfacecard.ThefactorydefaultsettingsofwirednetworkinterfacecardareIPaddress:
192.0.0.64,portnumber:8000,superuser:admin,superuserpassword:12345,whilethedefaultIP
address of wireless network interface card is 192.168.1.64. Before accessing to the wireless
network camera through wireless network, use the wired Ethernet port of the wireless network
cameratoconfigureparametersofwirelessnetworkinterfacecard.Theconfigurationstepsarethe
samewayassection1.3.
IfuserswanttoconfigurethewirelessparametersthroughIEbrowser,entertheremoteparameter
settingsinterfacefirst.Refertosection'2.1.2.3AdvancedConfiguration'formoredetailedsettings.
Afterenteringtheremoteparametersettingsinterface,select"WiFiparameters"‐>"WiFiSettings"
toentertheWiFisettingsinterface,asshowninfigure2.1.38.
Figure2.1.38WiFiSettingsInterface
IntheWiFisettingsinterface,ifuserselectAd‐Hocmodeastheoperatingmode,pleasesetthePC's
wireless IP address in the same network segment as the IP address of wireless network camera.
Select"ViewWirelessNetworks"inthecomputer's"WirelessNetworkConnection".Findthedevice
which has the same name as the SSID num
ber of the wireless camera. Then point‐to‐point
communicationthroughwirelessnetworkisestablishedsuccessfully.So,thereisnoneedtousean
AccessPoint(AP)betweenthePCandwirelessnetworkcamera.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.