Specifications

UserManualofNetworkCamera
21
 
If the protocol type is selected
to IPServer, please input the
ServerAddressoftheIPServer.
Click"Save"buttontosavethe
modifiedparameters.
Note: Please reboot the
networkcameratovalidatethe
modifiedparameters.
 Figure2.1.19IPServerSettings



 Figure2.1.20NTPSettings
NetworkParametersNTP
Setting:
Click the checkbox of Enable
NTP to enable  this function.
Input the Server Address and
PortofNTP.
If the public network is
applied, please input the NTP
Server Address with provision
of time  sync service, e.g.,
210.72.145.44.
In the private network is
applied, the NTP software ca
n
beusedtoestablishNTPserver
to achieve time
synchronization.
Click"Save"buttontosavethe
modifiedparameters.
Note: Please reboot the
networkcameratovalidatethe
modifiedparameters.











© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
