Specifications

UserManualofNetworkCamera
10
1.3NetworkConnection
Before visiting network camera over network, user should acquire its IP address first. SADP is a
software tool which can automatically detect network device in the LAN and give the device’s
information like IP address, mask, port number, device serial number, software version, etc., as
showninFigure1.3.1.

Figure1.3.1
Selectthedevice,andsetitsIPaddressandmaskatthesamenetworksegmentwiththePC.
ForthedetailedintroductionofSADP,pleaserefertoAppendix1.
Note:The network camera is set with the factory default IP address of “192.0.0.64”, the port of
“8000”,thesuperusernameof“admin”andthepasswordof“12345”.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
