Goodman AVPTC Installation Instructions ComfortBridge

15
1. Make sure the installed 24VAC thermostat is capable of
controlling the accessory or accessories.
2. Connect the appropriate accessory control wires to the
accessory devices from the thermostat (see thermostat
manual for connecon and setup instrucons).
3. If the thermostat is capable of providing a connuous fan
call (G signal) during accessory operaon:
Make sure to connect the thermostat G terminal to the G
terminal on the indoor unit. Setup thermostat to ensure G
signal is energized during accessory operaon.
FIgure 21
4. Select the appropriate fan only airow for the accessory
using the indoor unit push buon menus or the Cool Cloud
HVAC phone applicaon.
5. Using the thermostat, independently test each accessory
in addion to the independently tesng connuous fan
mode.
22 RampingProles
The variable-speed circulator oers four dierent ramping
proles. These proles may be used to enhance cooling perfor-
mance and increase comfort level. Select the desired ramping
prole using the Cool Cloud phone applicaon or the push buon
menus.
Figure 22