Technical information

Go to table of contents
DCS_Direct_Jet_1024UVHS_Maintenance_Troubleshooting_Guide_1.2.docx 8 | Page
MAINTENANCE and CLEANING
When powering the printer back on, remember to turn on the main power then wait 5 seconds before
powering up the print engine. This is to allow time for the LED light to calibrate its distance from the print
head.
Although your Direct Jet printer is engineered to provide many years of trouble-free operation, regular
cleaning and periodic maintenance are required to keep your machine running smoothly.
BEGINNING OF THE DAY
Page
√
Turn on main power (wait 5 seconds)
9
√
Inspect spit tray – clean as needed
9
√ Shake white ink (before turning on print engine) 9
√
Power up the print engine 9
√
Achieve a correct nozzle check
9
√
Correct missing nozzles if necessary
15
END OF THE DAY
√ Achieve a correct nozzle check 9
√
Clean gaskets on capping station 9
√
Power down print engine
√
Turn off main power
9
√
Empty waste ink bottle
9
√ Complete Maintenance Log 40
BEGINNING OF THE WEEK
√
Turn on main power (wait 5 seconds) 9
√
Shake white ink (before turning on print engine)
9
√
Power up the print engine
9
√ Reset Waste Ink Pad Counter and power cycle print engine 9
√
Inspect spit tray – clean/replace as needed
10
√
Clean and lubricate print station X-axis shafts and rails 10
√
Clean the UV lamp
12
√
Lubricate Y-axis rails
12
√
Achieve a correct nozzle check 9
√
Clean print head encoder strip for X-axis 13
√
Clean the wiper blade
13
END OF THE WEEK
√
Achieve a correct nozzle check
9
√ Power down print engine
√
Turn off main power 9
LONG TERM MAINTENANCE
√
Run a nozzle check once per week (if printer is idle)
9
√
Inspect intake fan filter on UV lamp and replace as necessary
13
√ Replace syringes and filling needles every 28 days 14
√
Clean encoder wheel for Y-axis every 84 days 14
√
Replace capping station every 84 days
16
√
Replace cartridges every 84 days
14
See the Maintenance Log for a printable checklist. You will be required to present a completed
maintenance log for any tech support and warranty requests. Find the printable log at the end of this
document.
T
A
S
K
O
V
E
R
V
I
E
W