Technical information

Shake White Ink
Power up Print Engine
Reset Ink Pad Counter and Re-Cycle Power
Clean UV Lamp Lens
Clean and Lubricate X-Axis shaft and rails
Lubricate Y-Axis rails
Clean X-Axis encoder strip
Clean Wiper Blade
Achieve Correct Nozzle Check
Achieve Correct Nozzle Check
Power Down Machine
Empty ink waste bottle
Week 12
Start Date:_____________
Shake White Ink
Power up Print Engine
Achieve Correct Nozzle Check
Shake White Ink
Power up Print Engine
Achieve Correct Nozzle Check
Shake White Ink
Power up Print Engine
Achieve Correct Nozzle Check
Shake White Ink
Power up Print Engine
Achieve Correct Nozzle Check
Shake White Ink
Power up Print Engine
Achieve Correct Nozzle Check
Shake White Ink
Power up Print Engine
Achieve Correct Nozzle Check
Pre Production: Day 78 Day 79 Day 80 Day 81 Day 82 Day 83 Day 84
Mid-Production: Day 1
Post Production: Day 1
Achieve Correct Nozzle Check
Power Down Machine
Empty ink waste bottle
Achieve Correct Nozzle Check
Power Down Machine
Empty ink waste bottle
Achieve Correct Nozzle Check
Power Down Machine
Empty ink waste bottle
Achieve Correct Nozzle Check
Power Down Machine
Empty ink waste bottle
Achieve Correct Nozzle Check
Power Down Machine
Empty ink waste bottle
Achieve Correct Nozzle Check
Power Down Machine
Empty ink waste bottle
Initial_______ Initial_______ Initial_______ Initial_______ Initial_______ Initial_______ Initial_______
Notes
Notes
Notes
Change
Capping
Station
Inspect UV
Light Exhaust
Filter (model
specific)
Replace Syringes
and Filling Needles