Technical information
Table Of Contents
- DCS_Direct_Jet_1024UVHS_Maintenance_Troubleshooting_Guide_1.2
- 0TSAFETY AND PRECAUTIONS
- MAINTENANCE and CLEANING
- Daily Maintenance and Cleaning
- Weekly Maintenance and Cleaning
- Monthly or Periodic Maintenance
- Correcting a Bad Nozzle Check Condition
- Clear a Clogged Nozzle for the Print Head
- The Capping Station
- X & Y "0" Calibration Adjustment
- Print Head and Lamp Height Check
- Adjusting the head height
- Replacing a Direct Jet Print Head
- TROUBLE SHOOTING
- Error Conditions
- Hardware Troubleshooting Guide
- Print quality and Ink Supply Problems
- PRINTING - INFO SHEET AND FAQs
- DCS_Direct_Jet_UV_Printer_Maintenance_Log_REVB021413
Go to table of contents
DCS_Direct_Jet_1024UVHS_Maintenance_Troubleshooting_Guide_1.2.docx 4 | Page
Table of Contents
SAFETY AND PRECAUTIONS………………………………………………………………………………………6
MAINTENANCE and CLEANING……………………………………………………………………………………8
Daily Maintenance and Cleaning…………………………………………………………………………9
Weekly Maintenance and Cleaning……………………………………………………………………9
Monthly or Periodic Maintenance………………………………………………………………………13
Correcting a Bad Nozzle Check Condition……………………………………………………………15
The Capping Station……………………………………………………………………………………16
Replacing a Direct Jet Print Head………………………………………………………………………27
TROUBLE SHOOTING………………………………………………………………………………………………28
PRINTING - INFO SHEET AND FAQs……………………………………………………………………………37