User Manual

5
Glue the elevator hinges in place using the
same techniques used to hinge the ailerons.
HINGING THE RUDDER.
Glue the rudder hinges in place using the
same techniques used to hinge the ailerons.
3) Remove each hinge from the horizontal
stabilizer panel and elevator and place a Tpin
in the center of each hinge. Slide each hinge
into the elevator until the T- pin is snug
against the elevator. is will help ensure an
equal amount of hinge is on either side of the
hinge line when the elevator is mounted to
the horizontal stabilizer panel.
Epoxy
WING ASSEMBLY.
Aluminium wing tube
See below pictures :
Epoxy
Epoxy
Knife.