User Manual

2020
INSTALLING THE RECEIVER AND
BATTERY.
1) Plug the ve servo leads and the switch
lead into the receiver. Plug the battery pack-
lead into the switch also.
2) Wrap the receiver and battery pack in the
protective foam rubber to protect them from
vibration.
3) Route the antenna out of the fuselage and
secure it to the vertical stabilizer using a rub-
ber band and a modied servo arm. See pic-
ture as below.
ATTACHMENT WING- FUSELAGE.
.
BALANCING.
1) It is critical that your airplane be bal-
anced correctly. Improper balance will
cause your plane to lose control and
crash. THE CENTER OF GRAVITY IS
LOCATED 72MM BACK FROM THE
LEADING EDGE OF THE WING AT
THE WING ROOT.
Switch.
Throttle.
Rudder.
Elevator.
.
Battery.
Tie wrap.
Receiver.
ELEVATOR - RUDDER PUSHROD IN-
STALLATION.
Elevator pushrod.
Rudder pushrod.
Control
horn.
Clevis.
Wing Bolt
Pen.
8mm
Cut.