User Manual

10
Using a modeling knife, cut one length of
fuel line 20” long. Connect one line to the
vent tube and one line to the fuel pick up
tube on the stopper. See picture bellow.
Blow through the tubes to make sure the
lines have not become kinked during installa-
tion.
Vent tube.
Fuel pick up tube.
Fuel ll tube.
INSTALLING THE SWITCH.
1) Install the switch into the precut hole in
the fuselage side. Use the two screws provid-
ed with the switch to secure it in place.
C/A glue
A
Fuel tank.
B