Users Manual

Manufacturer:
Dipeng Appliances(Guangzhou) Co.,LTD
Manufacturer’s Address:
1-4F, Unit 108, Building 12, 96 Lixin 12th
Road, Xintang Town, Zengcheng District,
Guangzhou, Guangdong, P.R.China
Tel: [phone]
-Not using the original adaptor(or
not the correct voltage).
-Use the original adaptor;
-Plug in properly and make sure the
power supply is in order.
7. Troubleshooting
Please refer to the table below for common issues/solutions.
if the problem persists, please contact you local customer
service for help.
-Adaptor or the power plug gone
loose.
- Re-plug the power plug;
- Turn on the switch.
- Please avoid direct sunlight on the
unit, or the accuracy of the
thermometer might be compromised;
-If the ambient temperature changed
dramatically,or the unit has been
moved from indoor to outdoor and
vice versa, please allow some time for
the thermometer components to
adapt.
-For details, please refer to 5. About
Human Body Temperature
Do not remove hands away from
the sensing area immediately after
temperature measurement and wait
for the spray to take place.
Hands are not reached into the
sensing area.
Cannot be
powered on to
ready stage
Spray not
functioning
properly
The power plug is not plugged in
properly, or the switch is not on.
The nozzle is partially blocked.
Check whether the disinfection liquid
needs a refill; if negative, replace
nozzle.
Abnormal results
- The unit is exposed to direct
sunlight;
- The ambient temperature
varies greatly;
- Individual factors.
*If you wish to learn more about Dipeng products, please visit our website: www.vision1999.com
for more information.
Issue Possible Causes Solutions
Made In China