Users Manual

- Conducting self-diagnosis based on the measurement
results and/or treatment can be dangerous. Please follow
the instrustions of your doctor.
- Do not use this unit other than for measuring the human
body temperature.
- Do not use the unit to measure any item with a temperature
higher than 80℃(176.0℉）.
- Please do not insert figer or any sharp object into the probe
lens, this may cause damage to the probe lens and/or
inaccurate readings.
- Do not disassemble, repair, or modify the unit.
- Most disinfectants are volatile, please consum in time to avoid
decrease in efficacy.
- If there is a significant difference in temperature between the
places where the unit is stored and where the unit is going to
be used, please allow at least 30 minutes before use.
- The nozzles are consumables, please replace as instructed to
avoid uneven spray or shortfall.
- When the probe lens becomes dirty, wipe it lightly with a soft
dry cloth or a cotton swab. Do not wipe the probe lens with
tissue paper or acid/alkaline liquid.
- Please do not drop or stand on the unit, also avoid
strong vibration or collision.
- This unit is a wallmounting type or need to be held securely in
place before use. Stand loose may result in personal injuries or
proporty damage.
- During measurement, make sure that no mobile phone is
within 30cm of the unit, this may casuse an inaccurate
reading.
- Do not operate this unit near pleces that have strong
electrostatic or emit electromagnetic wave, this may result in
incorrect operation of the unit and/or cause an
inaccurate reading.
Important Safety Information
These safety instructions must be strictly followed in use to avoid personal
injuries and property damage are as follows:
Warning