Instruction Manual

Cleaning / Maintenance of release mechanism

and locking bolts:

Periodically inspect release levers and locking bolts for

cleanliness and proper functioning: When release levers

are lifted, release levers and locking bolts should spring

back immediately and completely.

WARNING:

• Do NOT use restraint if release levers and locking bolts

do not function properly. There may be excessive

build-up of debris that cannot be removed or internal

damage to the locking mechanisms that could prevent

safe functioning.

• Do NOT oil or lubricate any part of the restraint.

Cleaning and Maintenance

• Do NOT use restraint if

there is any appearance

of rust on any metal

surface.

Remove debris from release

mechanism areas (Fig. 1)

with soft bristled brush.

Removing dried liquids or food requires more

thorough cleaning:

1. Secure restraint in its folded position (see page 11,

folding restraint).

2. Clean with damp cloth only: wet cloth with warm water

and wring thoroughly so it is NOT dripping water.

3. Towel dry.

4. Conrm areas are free of debris and release mecha-

nisms function properly.

• Use ONLY water.

• Do NOT use solvents, soap, abrasive cleaners or any

detergents.