Instruction Manual

32
Infant Support
Cushion
1
This restraint features an alumi-
num reinforced head rest lined
with EPS foam for advanced side
impact safety and performance.
Raise head rest:
Position hands under the very
back of the head rest, lift-up
(Fig. 3) .
Lower head rest:
Position hands on top of the very
back of the head rest, push down
(Fig 4.)
Proper Height:
When using the top three
harness slots, position head rest
so that bottom edge is above the
shoulder and about level with
the jaw. (Fig. 4)
When using the bottom two
harness slots, position head rest
at its highest location.
Side Impact Head Support
3
4
Infant Support:
This restraint features a full infant
head and body support. (Fig. 1)
Fasten Velcro tabs through
harness slots to keep infant head
pillow in place. (Fig. 2)
2
Toddler Body Support:
Remove infant head pillow
and place body support
cushion in restraint for
toddlers. Body support lays in
seat and does not fasten.