Instruction Manual

3. Push on restraint to force it

into vehicle seat while

pulling loose end of seat

belt to remove slack and

tighten lap portion of seat

belt. (Fig. 5)

WARNING:

• Make sure vehicle seat belt is properly locked.

• Failure to properly lock seat belt will result in an unsafe

installation that will greatly increase the potential for

injury or death to the child in an accident.

• Carefully read vehicle owner’s manual to determine seat

belt locking requirements or contact vehicle manufac-

turer.

See page 39 for instructions on using a locking clip.

CHECK LIST:

Conrm restraint is properly positioned.

Conrm seat belt is tight and securely locked.

Conrm seat belt buckle is properly fastened.

Conrm restraint is stable (see page 25).

Removal:

Release seat belt buckle and disconnect top tether if in

use. Properly store top tether.