Instruction Manual
13
Detachable Base
1
2
3
4
WARNING:
• Detachable base must be used 
when restraint is rear-facing.
• Do NOT use detachable base 
when restraint is forward-facing.
Installing base (Rear-facing only)
1. Conrm restraint is locked in its unfolded position 
(see page 10).
2. Conrm adjustable bottom is 
locked in its raised position 
(see page 29).
3. Align posts with holes and 
insert base into restraint 
bottom. (Fig. 1)
4. Slide base back until it 
reaches alignment mark on 
restraint bottom and secures 
into place. (Fig. 2)
5. Push down metal tab to lock 
base. (Fig. 3)
Removing Base
1. Lift metal tab to unlock base. 
(Fig. 3)
2. Slide base forward (the 
opposite direction as shown 
in Fig. 2).
3. Pull base away from restraint 
bottom.
Tip: To carry detachable base, 
t it inside folded restraint. 
(Fig. 4)










