Instruction Manual

Restraint Cover

Note: It is not necessary to remove

buckle tongs or chest clip from

harness straps when removing and

replacing restraint cover.

Removing restraint cover:

1. Unthread harness shoulder straps from back of restraint

(see page 36, adjusting

harness height).

2. Remove fasteners securing

cover to inside of restraint

bottom. (Fig. 1-A)

3. Unhook fasteners securing

cover to front of restraint.

(Fig. 1-B)

4. Carefully remove upper

portion of cover from

restraint taking care not to

damage the white EPS foam

panels, and then remove

cover from bottom portion

of the restraint.

Replacing restraint cover:

To replace the cover, follow cover removal instructions in

reverse order. Make sure harness shoulder straps are

threaded through correct slots and that harness straps are

not twisted. (See page 36, for changing harness height.)