User manual

9) Fix the battery waterproof protection cover in place with the four screws
provided.
10) Install the Diodor LED Solar Floodlight fitting on to the bracket
using the knurled bolts provided. Position the light fitting for optimum
PIR coverage (See Fig. 1)
11) Plug the solar panel cable and the light fitting together.
12) Installation is now complete. To test that the unit is working
satisfactorily, cover up the solar panel and you will be able to walk
test the unit in daylight.
KNURLED BOLT
SOLAR PANEL
KNURLED BOLT
SOLAR PANEL
NUT
WASHER WASHER
LARGE BRACKET
FOR SOLAR PANEL
PIPE
WALL FIXINGS
Diodor floodlight Diodor floodlight
WALL FIXINGS
4
FIGURE 1
NUT