User Manual
SBR0220LP
0.2A SBR
®
SUPER BARRIER RECTIFIER
NEW PRODUCT
SBR is a registered trademark of Diodes Incorporated.
Features
• Low Leakage Current
• Patented Super Barrier Rectifier Technology
• Ex
cellent High Temperature Stability
• Soft, Fast Sw
itching Capability
• 150ºC Operating Junction Temperature
• Lead Free Finish, RoHS Compliant (Note 1)
• “
Green” Molding Compound (No Br, Sb)
• Qualified to A
EC-Q101 Standards for High Reliability
Mechanical Data
• Case: DFN1006-2
• Case Material: Molded Plastic, “Green” Molding Compound.
UL F
lammability Classification Rating 94V-0
• Moisture Sensitivity
: Level 1 per J-STD-020D
• Polarity
Indicator: Cathode Dot
• Terminals: Finish - NiPdAu over Copper leadframe. Solderable
per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.001 grams (approximate)
Top View Bottom View
Maximum Ratings @T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
RM
20 V
RMS Reverse Voltage
V
R(RMS)
14 V
Average Rectified Output Current (See Figure 1)
I
O
0.2 A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I
FSM
5.0 A
Thermal Characteristics
Characteristic Symbol Value Unit
Maximum Thermal Resistance
Thermal Resistance Junction to Soldering (Note 2)
Thermal Resistance Junction to Ambient (Note 3)
R
θ
JS
R
θ
JA
17
304
ºC/W
Operating and Storage Temperature Range
T
J
, T
STG
-65 to +150 ºC
Electrical Characteristics @T
A
= 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 4)
V
(BR)R
20 - - V
I
R
= 400µA
Forward Voltage Drop
V
F
-
0.38
0.30
0.44
0.38
0.42
0.33
0.48
0.41
V
I
F
= 0.1A, T
J
= 25ºC
I
F
= 0.1A, T
J
= 150ºC
I
F
= 0.2A, T
J
= 25ºC
I
F
= 0.2A, T
J
= 150ºC
Leakage Current (Note 4)
I
R
-
2
0.43
50
1.3
µA
mA
V
R
= 20V, T
J
= 25ºC
V
R
= 20V, T
J
= 150ºC
Notes: 1. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
2. Theoretical R
θJS
calculated from the top center of the die straight down to the PCB cathode tab solder junction.
3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.
diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
SBR0220LP
Document number: DS31062 Rev. 5 - 2
1 of 3
www.diodes.com
March 2008
© Diodes Incorporated