Manual

ManualsBrandsDiodes ManualsHardwarePDS560

POWERDI is a registered trademark of Diodes Incorporated.

PDS560

Document number: DS30480 Rev. 15 - 2

1 of 5

www.diodes.com

October 2012

PDS560

5A SCHOTTKY BARRIER RECTIFIER

POWERDI

Features

• Guard Ring Die Construction for Transient Protection

• High Surge Current Capability

• Low Leakage Current

• Low Power Loss, High Efficiency

• For Use in High Frequency Inverters, Free Wheeling, and

Polarity Protection Applications

• High Forward Surge Current Capability

• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

• Qualified to AEC-Q101 Standards for High Reliability

Mechanical Data

• Case: POWERDI5

• Case Material: Molded Plastic, “Green” Molding Compound.

UL Flammability Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish – Matte Tin annealed over Copper leadframe.

Solderable per MIL-STD-202, Method 208

• Polarity: See Diagram

• Weight: 0.094 grams (approximate)

Ordering Information (Note 4)

Part Number Case Packaging

PDS560-13 POWERDI5 5000/Tape & Reel

PDS560Q-13 POWERDI5 5000/Tape & Reel

PDS560-7 POWERDI5 1500/Tape & Reel

Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.

2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

<1000ppm antimony compounds.

4. For packaging details, go to our website at http://www.diodes.com.

Marking Information

Top View

Bottom View

LEFT PIN

RIGHT PIN

Note: Pins Left & Right must

be electrically connected

at the printed circuit board.

BOTTOMSIDE

HEAT SINK

S560 = Product type marking code

= Manufacturers’ code marking

YYWW = Date code marking

YY = Last two digits of year (ex: 05 for 2005)

WW = Week code (01 – 53)

K = Factory Designator

YYWWK

S560

Green

POWERDI5

Summary of content (5 pages)

PAGE 1
PDS560 Green 5A SCHOTTKY BARRIER RECTIFIER POWERDI® Features Mechanical Data • • • • • • • • • • • Guard Ring Die Construction for Transient Protection High Surge Current Capability Low Leakage Current Low Power Loss, High Efficiency For Use in High Frequency Inverters, Free Wheeling, and Polarity Protection Applications High Forward Surge Current Capability Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free.
PAGE 2
PDS560 Maximum Ratings (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See figure 4) Non-Repetitive Peak Forward Surge Current 8.
PAGE 3
PDS560 3 2 1 0 IR, INSTANTANEOUS REVERSE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) PD, POWER DISSIPATION (W) 4 0 100 10 1 100m 10m 1m 100µ 10µ 3 4 5 6 7 8 9 10 2 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation 1 0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1,000 10m 1m 100 100n 10n 10 1n 0 TA, DERATED AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (A) 5 15 30 10 20 25 VR, DC REVERSE VOLTAGE (V) Fig.
PAGE 4
PDS560 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A D POWERDI5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
PAGE 5
PDS560 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein.