Owner manual

ManualsBrandsDiodes ManualsHardwarePDS3200

PDS3200

Document number: DS30470 Rev. 18 - 2

1 of 5

www.diodes.com

May 2013

PDS3200

PowerDI is a registered trademark of Diodes Incorporated.

3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER

PowerDI

Features

• Guard Ring Die Construction for Transient Protection

• Low Forward Voltage Drop

• Very Low Leakage Current

• Highly Stable Oxide Passivated Junction

• High Forward Surge Current Capability

• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

• Qualified to AEC-Q101 Standards for High Reliability

Mechanical Data

• Case: PowerDI

• Case Material: Molded Plastic, “Green” Molding Compound. UL

Flammability Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish – Matte Tin annealed over Copper leadframe.

Solderable per MIL-STD-202, Method 208

• Polarity: See Diagram

• Weight: 0.096 grams (approximate)

Ordering Information (Note 4)

Part Number Qualification Case Packaging

PDS3200-13 Commercial PowerDI

5 5000/Tape & Reel

PDS3200-7

Commercial

PowerDI

1500/Tape & Reel

PDS3200Q-13

Automotive

PowerDI

5000/Tape & Reel

Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"

and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

<1000ppm antimony compounds.

4. For packaging details, go to our website at http://www.diodes.com/products/packages.html

Marking Information

Top View

Bottom View

LEFT PIN

RIGHT PIN

Note: Pins Left & Right must

be electrically connected

at the printed circuit board.

BOTTOMSIDE

HEAT SINK

S3200 = Product type marking code

= Manufacturers’ code marking

YYWW = Date code marking

YY = Last digit of year (ex: 04 for 2004)

WW = Week code (01 – 53)

K = Factory Designator

YYWWK

S3200

Green

Summary of content (5 pages)

PAGE 1
PDS3200 Green 3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER ® PowerDI 5 Features Mechanical Data • • • • • • • • • • Guard Ring Die Construction for Transient Protection Low Forward Voltage Drop Very Low Leakage Current Highly Stable Oxide Passivated Junction High Forward Surge Current Capability Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free.
PAGE 2
PDS3200 Maximum Ratings (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also figure 5) Non-Repetitive Peak Forward Surge Current 8.
PAGE 3
IR, INSTANTANEOUS REVERSE CURRENT (mA) IR, INSTANTANEOUS REVERSE CURRENT (µA) PDS3200 1 0.1 0.01 0.001 10 1 0.1 0.01 0.001 120 160 200 40 0 80 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3 Typical Reverse Characteristics 0 800 CT, TOTAL CAPACITANCE (pF) IF(AV), AVERAGE FORWARD CURRENT (A) 3.75 f = 1MHz 700 600 500 400 300 200 100 3.0 Note 7 2.25 0.75 15 20 30 35 10 25 40 VR, DC REVERSE VOLTAGE (V) Figure 5 Typical Capacitance vs. Reverse Voltage 0 Note 5 1.
PAGE 4
PDS3200 Package Outline Dimensions A PowerDI®5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm D D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 Suggested Pad Layout Dimensions C G X X1 Y Y1 PowerDI is a registered trademark of Diodes Incorporated. 4 of 5 PDS3200 Document number: DS30470 Rev. 18 - 2 www.diodes.com Value (in mm) 1.840 0.852 3.360 1.390 4.
PAGE 5
PDS3200 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein.