Instruction Manual

PD3S220L
Document number: DS31733 Rev. 1 - 2
1 of 3
www.diodes.com
February 2009
© Diodes Incorporated
PD3S220L
PowerDI is a registered trademark of Diodes Incorporated.
NEW PRODUCT
2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PowerDI
®
323
Features
• Guard Ring Die Construction for Transient Protection
• High Surge Capability
• Lead Free Finish, RoHS Compliant (Note 1)
• "Green" Molding Compound (No Br, Sb)
• Ultra-Small Surface Mount Package
• Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
• Case: PowerDI
®
323
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Polarity: Cathode Band
• Terminals: Finish - Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.006 grams (approximate)
Maximum Ratings @T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
R
20 V
Average Forward Current (See also figure 4)
I
F
(
AV
)
2.0 A
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
I
FSM
33 A
Thermal Characteristics
Characteristic Symbol Typ Max Unit
Thermal Resistance Junction to Soldering Point
R
θ
JS
⎯
6
°C/W
Thermal Resistance Junction to Ambient Air (Note 2)
R
θ
JA
170
⎯
°C/W
Thermal Resistance Junction to Ambient Air (Note 3)
R
θ
JA
144
⎯
°C/W
Operating and Storage Temperature Range
T
J
, T
STG
-65 to +125
°C
Electrical Characteristics @T
A
= 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage
V
F
⎯
⎯
⎯
⎯
⎯
0.42
⎯
0.35
0.44
0.49
0.36
0.47
V
I
F
= 1.0A, T
A
= 25ºC
I
F
= 2.0A, T
A
= 25ºC
I
F
= 1.0A, T
A
= 125ºC
I
F
= 2.0A, T
A
= 125ºC
Leakage Current (Note 4)
I
R
⎯
30
11
160
30
μA
mA
V
R
= 20V, T
A
= 25°C
V
R
= 20V, T
A
= 125°C
Total Capacitance
C
T
⎯
46
⎯
pF
V
R
= 10V, f = 1.0MHz
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test to minimize self-heating effect.
Top View
Bottom View
Please click here to visit our online spice models database.