Manual

ManualsBrandsDiodes ManualsHardwareMBR2150

Data Sheet

HIGH VOLTAGE POWER SCHOTTKY RECTIFIER MBR2150

Aug. 2011 Rev. 1. 2 BCD Semiconductor Manufacturing Limited

General Description

The MBR2150 is a high voltage dual Schottky

rectifier suited for switch mode power supplies and

other power converters. This device is intended for

use in medium voltage operation, and particularly, in

high frequency circuits where low switching losses

and low noise are required.

The MBR2150 is available in standard DO-214AC

and DO-15 packages.

Features

•

Low Forward Voltage: 0.67V at 125°C

• High Surge Capacity

• Operating Junction Temperature: 150°C

• Guard−ring for Stress Protection

• Lead Free Packages Available

Main Product Characteristics

F(AV)

RRM

150V

(MAX)

150°C

(MAX)

=2A, T

=125°C)

0.67V

Mechanical Characteristics

• Case: Epoxy, Molded

• Epoxy Meets UL 94V-0 @ 0.125in

• Weight (Approximately): 1.9Grams

• Finish: All External Surfaces Corrosion

Resistant and Terminal

• Leads are Readily Solderable

• Lead Temperature for Soldering Purpose:

260°C Maximum for 10 Seconds

Applications

• Power Supply − Output Rectification

• Power Management

• Instrumentation

Figure 1. Package Types of MBR2150

DO-214AC DO-15

Summary of content (7 pages)

PAGE 1
Data Sheet HIGH VOLTAGE POWER SCHOTTKY RECTIFIER MBR2150 Main Product Characteristics General Description The MBR2150 is a high voltage dual Schottky rectifier suited for switch mode power supplies and other power converters. This device is intended for use in medium voltage operation, and particularly, in high frequency circuits where low switching losses and low noise are required. IF(AV) 2A VRRM 150V TJ(MAX) VF(MAX) (IF=2A, TC=125°C) 150°C 0.
PAGE 2
Data Sheet HIGH VOLTAGE POWER SCHOTTKY RECTIFIER MBR2150 Pin Configuration VR Package (DO-214AC) VG Package (DO-15) Cathode line by marking Cathode Anode Cathode line by marking Cathode Anode Figure 2.
PAGE 3
Data Sheet HIGH VOLTAGE POWER SCHOTTKY RECTIFIER MBR2150 Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit 150 V 2 A IFSM 75 A Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR, TC=TBD) Non Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Half Wave, Single Phase, 60Hz) Operating Junction Temperature Range (Note 2) VRRM VRWM VR IF(AV) TJ -65 to 150 °C Storage Temperature Range TSTG
PAGE 4
Data Sheet HIGH VOLTAGE POWER SCHOTTKY RECTIFIER MBR2150 Electrical Characteristics Parameter Symbol Maximum Instantaneous Forward Voltage Drop (Note 3) VF (MAX) Maximum Instantaneous Reverse Current (Note 3) IR (MAX) Conditions Value IF=2A, TC=25°C 0.85 IF=2A, TC=125°C 0.67 Rated DC TC=25°C Voltage, Rated DC TC=125°C Voltage, Unit V 0.1 mA 2.0 Note 3: Pulse Test: Pulse Width=300µs, Duty Cycle≤2.0%.
PAGE 5
Data Sheet HIGH VOLTAGE POWER SCHOTTKY RECTIFIER MBR2150 Mechanical Dimensions DO-214AC Cathode line by marking Unit: mm(inch) 3. 990(0.157) 4. 600(0.181) 0.152(0. 006) 0.305(0. 012) 1. 900(0. 075) 2. 290(0. 090) 0. 100(0. 004) 0. 310(0. 012) 0. 760(0. 030) 1. 520(0. 060) 4. 800(0. 189) 5. 280(0. 208) Aug. 2011 Rev. 1.
PAGE 6
Data Sheet HIGH VOLTAGE POWER SCHOTTKY RECTIFIER MBR2150 Mechanical Dimensions (Continued) DO-15 Aug. 2011 Rev. 1.
PAGE 7
BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifications herein.