Product Manual

RFI

④ Check the number of uses at the

bottom right corner. (Left)

Remaining count / (Right)

Cumulative count

⑤ Press the door button " " to open the top door.

⑥ Insert the object to be irradiated.

⑦ Press the start button " ". If the object is jammed by incorrectly

pressing the door button “ ", press the door button “ " again to open

the door and then press the start button “ ".

⑧ After UV irradiation, the top door opens automatically. Take the object out.

⑨ To repeat the work, repeat steps ⑥, ⑦ and ⑧.

⑩ When the device is not in use, touch the door button " " to close the top

door or press the power button " " to turn LED OFF and close the top door.

⑪ To reuse the device, press the door button " " to open the door and repeat

steps ⑥, ⑦ and ⑧.

⑫ If not using the device for long time, press the left power button " " and

remove the power adaptor from the body. Pull the external black plastic part

of the adaptor to remove it.

Connecting Separating After separating