Product Manual

05
03 Preparations
① Make sure to check that all components are ready.
② Avoid direct sunlight and install in a firm and flat place.
③ Install in a well-ventilated place.
④ Understand the method of use before operating the device.
⑤ Check rated voltage and recheck connection of the power cable.
⑥ Do not use mobile phones or portable telecommunication devices that
irradiate electromagnetic waves near this device.
⑦ Do not touch the power plug using wet hands, as doing so can cause accidents
like electric shock.
04 Precautions
① Read and understand User Manual before using.
② Install in a well-ventilated place.
③ Do not install on a non-flat or inclined floor. Such floor can cause the
product to fall over and get damaged.
④ Do not relocate the device during operation.
⑤ Never put a heavy object on the body.
⑥ Do not insert foreign matters and metal wires into the device as they can cause
failure or electric shock.
⑦ Do not use for unintended purposes.
⑧ If ozone leaks, ventilate immediately and avoid getting exposed to ozone.
⑨ If smoke or burning smell is generated, there is risk of fire and electric shock.
Remove the power cable and stop operating.
⑩ Do not bend or tie the power cable. If the power cable is damaged, make sure
to contact our company to exchange it.
⑪ Do not disassemble or alter the device at your discretion. Product warranty does
not apply to disassembled and altered products.
⑫ Do not forcibly open the top door or let foreign matters get into the lamp.
⑬ Do not use an adaptor other than the one provided with the device.
⑭ This device was not designed to be used by a person with physical, sensual or
mental disability or who cannot use the device safely without supervision due to
the lack of experience and knowledge (including children).