User manual

DAG Series User Manual
34
Dinstar Technologies Co., Ltd.
7. Login Password
Modify login user name and password to avoid unauthorized access to your DAG serial . The
default username is admin while the default password is admin too.
Figure 3-3-35 Login Password
8. Factory Reset
Figure 3-3-36 Factory Reset
Click “Apply” to restore the factory settings.
9. Restar
Figure 3-3-37 Restar
Click the “Save” button in the Configuration page to save the changes to the equipment
configuration. The following screen confirms that the changes are saved. If the changes need
restart, reboot or power cycle the equipment to make the changes take effect.