User manual

DWG2000C-4/8G User Manual
7 / 51
1.4.4 General Hardware Specification
 Power Supply: DC12V/4A
 Temperature: 0~40 ℃（Operation）, -20~80 ℃（storage）
 Humidity: 5%～90%RH
 Power Consumption: 5W
 Dimensions: 255(W) x220(D) x30(H) mm
 Net weight: 1.48kg
2. Equipment Quickly Installation
This chapter mainly introduces DWG2000C-4/8G hardware installation and connection of equipment.
2.1 Installation Notice
DWG2000C-4/8G adapts 12VDC. Power adapter, make sure AC power supply grounded well to ensure
the reliability and stability;
Notes: incorrect power connection may damage power adapter and device.
DWG2000C-4/8G provides standard RJ45 with 10Mbps or 100Mbps interfaces.
For Wireless part, make sure antennas connecting well on device. Inserting SIM cards and GSM
channels should work properly.
2.2 Installation Procedure
2.2.1 Install SIM Card
When installing SIM card, loosen the screws on the back of a small piece of blue backplane. Procedure
shows as below:
 Open the blue backplane
 Inset the SIM card to the SIM slot
 Cover the backplane
 Tighten the screws
Figure 2-2-1 SIM card Installation
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]