User manual

DWG2000-16G User Manual
_______________________________________________________________________________
Dinstar Technologies Co., Ltd.
42
4.11 IP Trunk Configuration
4.11.1 IP Trunk
Figure 4-11-1 IP Trunk
Table 4-11-1 Description of IP Trunk
Example
To add a remote IP of Softswitch, set “index” to “31”, SIP port number “5060”
Figure 4-11-2 IP Trunk Modify
IP Trunk
Add remote IP of softswitch, SIP server which will send call traffics to
gateway.
Index
It uniquely identifies a trunk . Its value is assigned globally, ranging from
0 to 31.
Description
It describes the trunk for the ease of identification. Its value is character
string
IP
It is an interworking parameter between the remote Softswitch and the
SIP server. It specifies the IP address of the peer equipment.
Port
It is an interworking parameter between the remote Softswitch and the
SIP server. It specifies the SIP port number of the peer equipment