User manual

DWG2000-16G User Manual
_______________________________________________________________________________
Dinstar Technologies Co., Ltd.
24
4.6.2Mobile
Figure 4-6-2 Mobile Configuration
Table 4-6-2 Description of Mobile Configuration
Mobile Number
SIM card number of the channel. That must be configured when “Forward”
funciton enable.
Enable Call
Duration
Limitation
This function is to limit the max call duration of channel. The max call
duration is between 1 to 65535 minutes.
Maximum Call
Duration
Defines a value by users. That will limit the SIM/UIM card’s total call
duration. After the call duration excesses this value, no call will be made from
this channel. The value range is 1-65535. If user doesn’t configure this value,
Default is no max call duration limits for this channel.
Minimum
Charging Time
A minimum charging time (in seconds) is defined during which no charging is
done at carrier side. If the conversation time is even shorter, the total call
duration will not decrease.
Mobile Number
（Receiving
Alarm）
The mobile phone No. which used to receive the alarm SMS. Users can get
SMS report of SIM/UIM card status(SIM Remain Time) in DWG.